STEEL STRIPS
STEEL PRODUCTS
Steel strips
Distahl steel strips can be cut to a minimum width of 6 mm and a maximum width of 1,500 mm, and are available in thicknesses ranging from 0.3 to 6 mm.
Continuously coated (AS)
By hot-dip coating with an aluminum-silicon (AS) layer
UNI EN 10346 / UNI EN 10143
Continuously coated (AZ)
By hot-dip coating with an aluminum-zinc (AZ) layer
UNI EN 10346 / UNI EN 10143
Continuously pre-painted
On a substrate of cold-rolled or continuously hot-dip galvanized steel
UNI EN 10130 / UNI EN 10131 / UNI EN 10346 / UNI EN 10143
A freddo zincati a caldo in continuo
Zincati a caldo in continuo, per formatura a freddo (Z)
UNI EN 10346 / UNI EN 10143
Cold-rolled, hot-dip galvanized in a continuous process
Continuously hot-dip galvanized, for cold forming (Z)
UNI EN 10111 / UNI EN 10051
Cold for deep drawing
Flat-rolled products for deep drawing or cold bending
UNI EN 10130 / UNI EN 10131
Cold-galvanized by the electrolytic process
Electrolytically galvanized flat-rolled steel for cold forming
UNI EN 10152 / UNI EN 10131
Prepainted aluminum
Flat, pre-painted aluminum sheets
UNI EN 485-2 / UNI EN 573-3
Tutti i prodotti
CUSTOM-MADE PRODUCTS
Based on a design specified by the customer, Distahl can cut, drill, and shape any type of steel tube with a chrome-plated, galvanized, or painted finish.
STEEL TUBES
steel products
Standard and custom-sized steel tubes are available in various wall thicknesses and specifications, in accordance with UNI EN 10305-3 and 10305-5. Upon request, Distahl can manufacture steel tubes in special sizes.
FLAT LAMINATES
STEEL PRODUCTS
A wide range of high-quality flat laminates. Upon customer request, Distahl can produce sheets in special sizes and any desired shape using laser cutting.
Certifications
Our network of suppliers includes certified manufacturers that operate in accordance with nationally and internationally recognized quality standards.
Upon request, we provide technical documentation and material certificates issued by the manufacturer, ensuring traceability and compliance with the specifications set forth in the relevant regulations.